Enhancing IR Thermographic Inspection of Subsurface Defects by Using the Technique of Edge Detection

Russian Journal of Nondestructive Testing - This paper presents a novel method for separating subsurface defects in cured preimpregnated carbon fiber reinforced polimer specimens on thermal images...     

Gd-Bi-M-Ce-O (M = Cu,Zr, Ni,Co, Mn) ceria-based solid solutions for low temperature CO oxidation

Ceria based solid solutions doped by Gd, Bi, and the third dopant were synthesized by the co-precipitation method with ultrasonic treatment, followed by calcination at the temperature of 500°С. Characterization of the synthesized nanosystems by XRD, TEM, TG, Raman spectroscopy, FTIR, XPS was carried out. It is shown that all obtained powders of solid solutions crystallized into a cubic structure of the fluorite type, with an average particle size of 5–15 nm. The samples had a mesoporous structure of the pore diameter of 2–5 nm. The catalytic activity of Gd-Bi-M-Ce-O (M = Cu, Zr, Ni, Co, Mn) solid solutions was carried out. The catalyst Gd_0.05Bi_0.15Mn_0.20Ce_0.60O₂ has the lowest oxidation temperature.     

Combined Application of Experimental Design and Artificial Neural Networks in Modeling and Characterization of Spray Drying Drug: Cyclodextrin Complexes

The aim of this study was to investigate the usefulness of combined application of quality by design tools such as central composite design (CCD), response surface methodology (RSM), and artificial neural networks (ANN) in the characterization, modeling, and optimizaton of spray drying of a poorly soluble drug : cyclodextrin complex. Models were developed by RSM and ANN from different pools of data. The model with best predictability was the ANN multilayer perceptron (MLP)1 model developed from the largest group of data (R ² for response yield 0.854, moisture content 0.886). On the other hand, analysis of equations derived from the application of RSM contributed in better understanding the complex relationships between input and output variables. By application of a desirability function approach, optimal process parameters that resulted in the best process yield (86%) and minimal moisture content in the powder (3.3%) were established (25% feed concentration, 180°C inlet air temperature, 10% pump speed).     

An initial study on feasible treatment of Serbian lignite through utilization of low-rank coal upgrading technologies

Despite benefiting from vast fuel reserves, combustion of low-rank coals is commonly characterized by low thermal efficiency and high pollutant emissions, partly due to high moisture content of the coals in question. Thus, removal of moisture from low-rank coals is deemed an important quality upgrading method. The paper provides an overview of the current status of low-rank coal upgrading technologies, particularly with respect to utilization of drying and dewatering procedures. In order to examine the influence of relevant parameters on the moisture removal process, a model of convective coal drying in a packed, as well as in a fluid bed combustion arrangement, is developed and presented. Product-specific data (intraparticle mass transfer, gas–solid moisture equilibrium) related to the coal variety addressed herein (lignite) are obtained through preliminary investigations. Effective thermal conductivity of the packed bed as defined by Zehner/Bauer/Schlünder is used to define heat transfer mechanisms occurring in the packed bed. Similar two-phase fluidization model has been validated for different types of biomaterials.     

The dependence of the photocatalytic activity of TiO2/carbon nanotubes nanocomposites on the modification of the carbon nanotubes

Nanostructural TiO₂/modified multi-wall carbon nanotubes photocatalysts were prepared by hydrolysis of Ti(iso-OC₃H₇)₄ providing chemical bonding of anatase TiO₂ nanoparticles onto oxidized- or amino-functionalized multi-wall carbon nanotubes (MWCNT). The processes of functionalization of the MWCNT and the deposition of TiO₂ influence the photocatalytic activity of the synthesized nanocomposites. The phase composition, crystallite size, and the structural and surface properties of the obtained TiO₂/modified-MWCNT nanocomposite were analyzed from XRD, FEG-SEM, TEM/HRTEM and FTIR data, as well low temperature N₂ adsorption. In the photocatalytic study, the TiO₂/oxidized-MWCNT catalyst showed the highest and the TiO₂/amino functionalized-MWCNT catalysts somewhat lower degradation rates, indicating that the enhancement of photocatalysis was supported by the more effective electron transfer properties of the oxygen- than amino-containing functional groups, which support the efficient charge transportation and separation of the photogenerated electron-hole pairs.     

Weathering of High-Density Polyethylene-Wood Plastic Composites

Due to the widespread use of wood-plastic composites (WPCs), high-density polyethylene-wood flour composites (HDPE/WF) were studied in order to determine their stability in different application conditions. UV degradation and periodic absorption/desorption of moisture cause damaging changes to material during WPCs’ exterior application, so it is necessary to ensure WPCs’ durability against atmospheric influences. Samples were characterized by FTIR spectroscopy and scanning electron microscopy (SEM) in order to study the degradation after simulated weathering. The degree of water absorption was also determined. Thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) were used for the determination of composites’ thermal properties. Results show that the stability of the HDPE/WF composites to UV treatment highly depends on stabilizer content and its dispersion in the polymer matrix. Incompatibility of HDPE and wood particles is a major problem that should be solved to achieve good durability and satisfying properties in use.